DIY TIPS:

🛠️ BRW Home Services – Customer DIY Tips

1. Patch Small Drywall Holes

Use a pre-mixed spackle for nail holes or dents.

Apply with a putty knife, let dry, sand smooth, and touch up with matching paint.

For larger holes, use a mesh patch before applying compound.

2. Unclog a Drain Naturally

Pour ½ cup baking soda followed by ½ cup vinegar into the drain.

Cover and let sit for 15–30 minutes, then flush with boiling water.

Repeat monthly to keep drains fresh and clear.

3. Touch-Up Wall Paint

Keep a small container of leftover paint for quick fixes.

Use a sponge or small foam brush for better blending.

Clean the area first—dirt will affect paint adhesion.

4. Reset a Tripped Circuit Breaker

If power is out in one area, check the breaker box.

A tripped breaker will sit between ON and OFF. Turn it off fully, then back on.

If it trips again, call a professional—there may be a bigger issue.

5. Stop a Running Toilet

Open the tank and check the flapper or float.

A flapper not sealing properly or a float set too high causes constant running.

Replace parts easily with a kit from the hardware store.

6. Prevent Cabinet Door Slamming

Install soft-close bumpers—easy peel-and-stick options.

Reduces noise and adds a professional touch to your kitchen or bathroom.

7. Clean and Seal Grout

Use a mix of baking soda and water for scrubbing.

Once dry, apply grout sealer to protect from stains and mildew.

Reseal every 6–12 months in high-use areas.

8. SAFETY FIRST!

Always turn off water or electricity at the source before starting any repair.

When in doubt, call a pro—BRW Home Services offers free estimates with a signed service!